Completed: a round quilt with a sheep in the center

180414_3

Does a quilt always have 4 corners? Of course not! One of my friends asked if I could make a round quilt that they could use as a mat in their round playpen. Challenge accepted! Luckily, I already had a 25’’ 9 degree wedge ruler that makes it (almost) a breeze to make a circular design. You can make really spectacular designs with this ruler but I kept it fairly simple for this first attempt at making something circular.

180414_6

After a look around the recipient’s living room I decided on a blue with some orange colour scheme. For the front I used some fat quarters from Elizabeth Hartman’s Rhoda Ruth collection for Robert Kaufman. I used 8 blueish/greenish and 2 orange fabrics from that collection and I added some grey fabric from Karen Lewis’ Blueberry Park collection, also for Robert Kaufman.

180414_1

From the grey fabric I cut 8x 3.5’’ strips, from each orange fabric 4x 3’’ strips and from each blue fabric 1x 7.5’’ and 1x 5’’ strips. They were pieced in the following order: grey, wide blue, orange, narrow blue. The ruler was used to cut 5 wedges from each strip set, alternating the grey fabric at the wide and narrow end of the ruler.

180414_5

Fabric strip sets waiting to be cut into 40 wedges.

Since the quilt will be mainly used as a playing mat inside a playpen the back probably won’t be on display very often so I only used the grey fabric. That I was 4 or 5 months pregnant when I made this quilt also made me want to just move on to the quilting stage instead of piecing something else first. Quilting was done with my walking foot and I kept it simple by just following some lines in the quilt.

To cover the hole in the center I enlarged a sheep silhouette picture I found somewhere (but I made this quilt so long ago that I really can’t recall where, sorry!). It was attached with a satin stitch after quilting. To secure it in the middle I quilted the child’s name inside the sheep.

180414_2

To cut the quilt to size (95 cm diameter) to fit the playpen I made a circle out of tracing paper and used that as a template.

The quilt was also bound with the grey fabric. For a square quilt the binding is cut on grain, but since for this quilt the binding had to go around a curve I cut it on the bias so it had some stretch. The outermost edge of the quilt has a larger circumference than the 1/4” from the edge which is the stitching line for the binding as it is attached. To make sure that the binding will fit around the edge as you fold it to the back it is essential to somewhat ease the binding in when it is attached to the front so the binding strip is as long as the outermost edge. I was a bit anxious about getting this right, but in the end it worked pretty well.

This project pushed me out of my comfort zone but I am glad it forced me to finally make good use of that ruler. It was a lot easier to use than I had anticipated. The trickiest part is that you really want to be very accurate with your cutting and piecing because your circle will otherwise not lie flat when it is completed. Luckily, I didn’t run into any problems and it turned out to be a lot of fun. I’ll definitely use this ruler again.

180414_4

Oh, the absolute joy I felt when my 1/4 circles were exactly 90 degrees!

Advertisements