Completed: Colette Sorbetto

130905_Sorbetto1I came across the Sorbetto from Colette patterns while searching for a top that I would be able to squeeze out of a 60 cm long piece of fabric. The Sorbetto seemed to fit the bill perfectly as there are not too many details that take up precious fabric.

I first made a muslin in size 6 and from the waist down I blended to in between size 8 and 10 at the hem because I thought my pear shape would need it. When trying it on I decided that this definitely created too much flare at the hem (the pattern itself already has quite a bit of flare) so I changed it back to size 6. The only thing I changed was to remove ½’’ at centre back. The muslin also proved to be good practice for the construction because in my muslin the pleat ended up on the inside…

130905_Sorbetto3The main fabric is a 100% extra combed shirting cotton from Tessitura Monti that I had left-over after making a classic tailored shirt for my brother. The cutting instructions for the Sorbetto tell you to fold the fabric once and then to cut both pattern pieces on the same fold. My fabric was 160cm wide and by creating two fold lines by lining up the selvages I had more than enough room to cut out both pieces from a piece of fabric that was a little over 60 cm instead of the 1.5 yard that is called for in the instructions. So, for the smaller sizes you can definitely make this top with less fabric!

Unfortunately, I did not have enough fabric left to make my own bias tape. I intended to use store bought bias tape from my stash, but when I held it next to my good quality fabric it looked extremely cheap so that idea went out of the window.

130905_Sorbetto6

Just look at that edge stitching!

Instead, I chose to use a quilting cotton from the Desert Daydreams collection of Anthology Fabrics to make my own bias tape with. Because the print is small scale it is clearly visible on the ½’’ bias tape and I feel this adds a nice detail to the top. I am also really happy with how my edge stitching on the bias tape turned out, it is probably the best I have done up until now.

130905_Sorbetto8

French seam on the inside of the top.

I am rather pleased with the fit, although if I were to make this top again I think I would lower the armholes a little since they are just a bit too tight. For the shoulder and side seams I used French seams. In Dutch, funnily enough, a French seam is called an English seam, which makes me wonder what it is called in French… These seams make the inside of the garment look much tidier and with this top there are only 4 seams that require finishing so it doesn’t even take that much longer to complete the garment.

Overall I am happy with how this top turned out. In the future I will definitely try another Colette pattern as I thought the PDF pattern was easy to assemble and the instructions were very clear.