Completed: Serpentine hat

There is a first time for everything and this time I made myself a hat! I used the Serpentine hat pattern from Elbe textiles and I really like this pattern. It only took 2 evenings of sewing, which made for a nice change from the quilts that I am making that take a whole lot longer to complete. I made size S which is a good fit for my smallish head (for commercial patterns I wear a 56 cm).

Despite my huge stash I did not really have much suitable sturdy fabric options for a hat (must change that soon!) so to try out the pattern I used a remnant of curtain fabric. I now match our former living room and current bedroom curtains… For the top and band I used the same fabric for the lining but I did not have enough left for the brim lining so I used a floral batik instead. Because the batik was not particularly sturdy, I put some woven sew in interfacing in the brim to add some structure.

Changes that I made

Apparently, I am not able to completely follow a pattern to the letter so I made some changes. Because I found the outer fabric a bit boring on its own I did some topstitching with contrasting 38wt Gutermann Sulky thread on the outside band before assembly and also through both sides of the brim before attaching it to the band. I think this may provide some extra structure to the brim too but I’m not entirely sure because I haven’t tested it without topstitching.

The pattern is written to be reversible but my hat isn’t. I am very much a Dutch stereotype when it comes to cycling. I also burn very easily when it’s sunny, so in the summer I often wear a hat when I cycle. We live close to the sea so on most days you can add some wind and then a hat is not very likely to stay on top of your head for very long. The two commercial hats that I own and wear have this feature inside the band that helps to keep the hat more secure on top of your head. It’s basically a tunnel of fabric through which a ribbon is threaded that you can tie so it fits snugly around your head. I incorporated this into the Serpentine hat by tracing the first 1 ¼’’ of the inner side of the brim and sewing this into a tunnel that is open on one side to thread a ribbon through. I now realize that it may make even more sense to trace the lower part of the band instead of the inner part of the brim, and I will try this next time. I first basted the tunnel to the right side of the band lining before it was attached to the brim. The outer band is attached to the brim by topstitching and if you add a tunnel make sure to push it out of the way so you don’t accidently stitch through it.  

This hat stays on my head very well. It does not completely survive the cycling test though. When there is a head wind the brim flaps up against the band so it is a bit too floppy for that purpose. For walking around it’s absolutely fine, however. On my next version I am going to use a sturdier interfacing to see if that adds the structure I need. I am also going for a much brighter colour because it’s summer!

Have you ever made a hat and are there any patterns that you recommend?

P.S. my June newsletter goes out tomorrow or Thursday so if you’d like to read a bit more about what I get up to, want some book recommendations or read about other random and not so random stuff there is still time to sign up!